Current calibration certification within 6 months
• 2 Chart Recorders & 1 remote recorder
• Crystal digital deadweight
• 10 Remote gauges, ranging from 0-400psi to 0-5000psi
• 3 Panel mounted gauges
• 1.5 Cubic meters fluid capacity
• Tri-plex capabilities 0 – 35,000 KPA, volume rate 28 liters/min.
• Current calibration certification within 6 months
• Equipped with 150’ plus high pressure hose reels
• 2 Chart recorders & 1 remote recorder each
• 2 Crystal digital deadweight’s
• 10 Remote gauges, ranging from 0-400psi to 0-5000psi
• 3 panel mounted gauges
• Both units with 2 cubic meters fluid capacity
• Tri-plex capable of 0- 42,000 KPA, volume rate 90 litres a minute
• Current calibration certification within 6 months
• Equipped with dual 130’ high pressure hose reels
• 2 Chart recorders & 1 remote recorder
• 2 Crystal digital deadweight’s
• 10 Remote gauges, ranging from 0-400psi to 0-5000psi
• 2 panel mounted gauges
• 6.5 Cubic meters fluid capacity
• Triplex capable of 44,000 KPA, volume rate 160 litres a minute
• Current calibration certification within 6 months
• Equipped with dual 130’ high pressure hose reels
• 2 Chart Recorders and 1 remote recorder
• 1 Crystal digital deadweight
• 10 Remote gauges, ranging from 0-400psi to 0-5000psi
• 3 Panel mounted gauges
• 2.5 Cubic meters fluid capacity
• Tri-plex capabilities 0 – 35,000 KPA, volume rate 70 liters/min
• Current calibration certification within 6 months
• Equipped with 130’ plus high pressure hose reels
• 2 truck mounted chart recorders and 1 remote recorder, ranging from 3,500 kPa to 35,000 kPa
• 2 Crystal digital deadweight’s
• 14 Remote gauges & 2 panel mounted gauges, ranging from 0-400psi to 0-10,000psi
• 4.5 Cubic meters fluid capacity
• Tri-Plex capable of 44,000 KPA, volume rate of 120 litres/minute
• Centrifugal pump 3” by 2”, volume rate of 1.5 cubic metres/minute @ 150 psi with a max pressure of 280 psi
• Equipped with dual 130’ plus high pressure hose reels
• 4 Chart Recorders ranging from 3,500kpa to 35,000kpa
• 2 Crystal digital deadweight’s
• 8 Remote gauges & 2 panel mounted gauges
• 9 Cubic meters fluid capacity
• Tri-Plex capable of 44,000 KPA, volume rate of 500 litres a minute
• Centrifugal pump 3” by 2”, volume rate of 1.5 cubic metres @ 150 psi with a max pressure of 280 psi
• Tex Heater 5.5 million BTU capable of heating 500 litres per minute converting temps 0C to output 50C. Max temp 99C
• 36 cubic meter semi-trailer
• 30 cubic meter semi-trailer
• 4” T&E positive displacement pump, capable of 1.5 cubic meters per minute
• 22m3 truck tank capacity and 22m3 pup trailer capacity
• 4” T&E product pump for fill and de-water at a rate of 1.5 m3/minute
• High pressure system capable of 4000 psi and 80 L/minute
• Digital deadweight (0-10,000 psi) and various remote pressure gauges, all current 6 month calibrations
• Hose reel with 120’ of 1” high pressure hose rated for 3000 psi
• Remote chart recorders available upon request
All test trucks are certified bi-annually and any project specific certification may incur a re-certifying fee. Our company policy is 90 day drug and alcohol testing. Drug and Alcohol testing required less than 90 days will incur a fee. All project quotes are based on hourly time rates and site conditions. Any non-disclosure of site requirements at time of project commencement that results in lost time or delay will be subject to the unit’s full operating rate. Damage to Canadian Pressure Testing equipment due to site contractor neglect or poor road conditions will incur a fee for repair &/or replacement. Standby rates shall be applied as required by customer at half operating rate for a minimum of 8 hours/day. Third party contractors are billed out at 15% above their current company rate.
Copyright © 2023 Canadian Pressure Testing Technologies Ltd. - All Rights Reserved.
Serving Western Canada